режим универсальный репитер

Multiple SSID is often used to create VLAN in a wireless network. Multiple SSID can also be use to increase network flexibility, efficiency, and security.

Q8.What is Multiple SSID? Jan 18, 2008 Answer:  Multiple SSID is a concept that allows us to logically divide the access point into several virtual access points all within a single device. Each of the Virtual AP appears to stations (STAs) to be an independent physical AP.

Q7.What is WLAN Partition? Jan 18, 2008 Answer:  WLAN partition is a feature applied in most of D-Link Access Points. If this feature is enabled, then there is no barrier between communication among wireless stations connecting to the Access Point. If this is disabled, wireless stations of the selected band (802.11a or 802.11g) are not allowed to exchange data through the Access Point. The default value is set to 'Enabled'.

Lack of a checksumFor more information, .

Stateless autoconfiguration of hosts

Q6.What are the differences of IPv6 compare to IPv4? Jan 21, 2008 Answer:  

This mode is only supported in D-Link DAP-1160.

The following is an illustration of an AP running WISP Client Router AP mode:

Q5.What is the function of 'WISP Client Router' mode among all the operational modes supported in D-Link AP? Feb 18, 2008 Answer:  In WISP Client Router mode, the AP wirelessly connects to a WISP (Wireless Internet Service Provider) AP and acts as a router for wired clients on the LAN, to allow the client to still access the Internet even though it is using wireless technology.

This mode is only supported in D-Link DAP-1160.

Q4.What is the function of 'WISP Repeater Access Point' mode among all the operational modes supported in D-Link AP? Feb 18, 2008 Answer:  In WISP Repeater mode, the AP wirelessly connects to a WISP (Wireless Internet Service Provider) AP and repeats the signal received from the WISP. In this mode, the AP also acts as a router for both wireless and wired clients on your LAN. Illustration of an AP running WISP Repeater mode:

A site survey helps define the contours of RF coverage in a particular facility. It helps discover regions where multipath distortion can occur, and areas where RF interference is high, to find solutions to eliminate such issues. A site survey determining the RF coverage area in a facility also helps choose the number of Wireless devices a firm needs in order to meet its business requirements.

Q3.What is Wireless Site Survey? Mar 12, 2008 Answer:  Wireless Site Survey is the most important part of building a wireless LAN, and this task is the first step of all processes needed to build a WLAN. A site survey is performed task-by-task by the surveyor analyzing the location to understand the RF behaviour, discover RF coverage areas, check for RF interference, and determine the appropriate placement of wireless devices. The survey usually involves a site visit, visual inspection, and analysis of building floor plans. Interviews with IT management and end-users of the wireless network are important to determine the design parameters for the wireless network.

Automatic Power/ Channel Adjustment to control the performance of wireless network

Unified Switching (Consist of Wireless Controller and L2+ Switch)

Below is a list of what D-Link Unified Access System can provide:

D-Link Unified Access System offers several advanced features to manage the entire network, especially for large to enterprise networks. By deploying this system, all network management tasks can be made easier. For example, instead of managing all the networks separately, which will be a very difficult task for a large network, D-Link Unified Access System provides a centralized wireless network management.

Q2.What is Unified Access System? Apr 01, 2008 Answer:  D-Link Unified Access System is a scalable solution that enables easy and centralized WLAN deployment to provide secure wireless connectivity.

Power off and power on the DWR-500 six times continously,and the interval time is about 40s at every power on.

FAQsFind answers to frequently asked questions relating to D-Link's productsBy category: All CategorySwitchingWirelessSecurityNetwork ManagementRouterBy model: Back to topDAP-1353DWL-2100APDWL-2200APDWL-2700APDWL-3200APDWL-3260APDWL-3500APDWL-7100APDWL-7700APDWL-8200APDWL-8220APDWL-8500APDWL-G700APDWL-G730APDWL-G810DWR-1000DWR-300iDWR-500WirelessQ1.  Jan 22, 2009Q2.  Apr 01, 2008Q3.  Mar 12, 2008Q4.  Feb 18, 2008Q5.  Feb 18, 2008Q6.  Jan 21, 2008Q7.  Jan 18, 2008Q8.  Jan 18, 2008Q9.  Jan 18, 2008Q10.  Jan 18, 2008Q11.  Jan 15, 2008Q12.  Jan 15, 2008Q13.  Jan 15, 2008Q14.  Jan 14, 2008Q15.  Jan 14, 20081 Q1.How to recover the password on DWR-500? Jan 22, 2009 Answer:  Password Recovery Procedure: